Filter
Top Products
Chapter 21 Logs
P-2612HNU-Fx User’s Guide
250
The following table describes the fields in this screen.
21.4 Log Descriptions
This section provides descriptions of example log messages.
Table 74 Maintenance > Logs > Log Settings
LABEL DESCRIPTION
Syslog
Logging
The ZyXEL Device sends a log to an external syslog server.
Active Click Active to enable syslog logging.
Syslog Server Enter the server name or IP address of the syslog server that will log the
selected categories of logs.
UDP Port Enter the port number used by the syslog server.
Active Log and Alert
Log Select the categories of logs that you want to record.
Send
Immediate
Alert
Select log categories for which you want the ZyXEL Device to send E-mail
alerts immediately.
Apply Click this to save your customized settings and exit this screen.
Cancel Click this to return to the previously saved settings.
Table 75 Call Statistics Logs
LOG MESSAGE DESCRIPTION
Start Outgoing Call [SIP
Number]
Someone used a phone to make an outgoing call.
rx pkts %d,rx bytes %d,lost
pkts %d,avg jitter %d,tx
pkts %d,tx bytes %d
Display the RTP packets status.
In Call End [SIP
Number],Duration: Seconds
Incoming call from SIP number has terminated. Show
the call duration.
Out Call End [SIP
Number],Duration: Seconds
Outgoing call from SIP number has terminated. Show
the call duration.
Incoming Call Established
[SIP Number]
Incoming call from SIP number has been established.
Outgoing Call Established
[SIP Number]
Outgoing call to SIP number has been established.