Filter
Top Products
Chapter 5 WAN Setup
P-2612HNU-Fx User’s Guide
100
Click Network > WAN > Layer 2 Interface. The following screen opens.
Figure 14 Network > WAN > Layer 2 Interface: Ethernet
Figure 15 Network > WAN > Layer 2 Interface: ADSL ATM
The following table describes the fields in this screen. Some of the fields are not
available for the Ethernet interface.
Table 10 Network > WAN > Layer 2 Interface
LABEL DESCRIPTION
Interface Select an interface for which you want to configure here.
ATM: The ZyXEL Device uses the ADSL technology for data
transmission over the DSL port.
Ethernet: The ZyXEL Device transmits data over the Ethernet WAN
port. Select this if you have a DSL router or modem in your network
already.
Interface/
(Name)
This is the name of the interface.
VPI This is the Virtual Path Identifier (VPI).
VCI This is the Virtual Channel Identifier (VCI).
Category This is the ATM traffic class.
Link Type This is the DSL link type of the ATM layer-2 interface.
Connection Mode This displays the connection mode of the layer-2 interface.
Remove Check this and click the Remove button to delete this interface from
the ZyXEL Device. A window displays asking you to confirm that you
want to delete the interface.
Note: You cannot remove the layer-2 interface when a WAN
service is associated with it.