Filter
Top Products
Chapter 6 LAN Setup
P-2612HNU-Fx User’s Guide
123
and subnet mask of your ZyXEL Device and configure the DNS server information
that the ZyXEL Device sends to the DHCP client devices on the LAN.
Figure 29 Network > LAN > IP
The following table describes the fields in this screen.
6.3 DHCP Server Screen
Use this screen to configure the DNS server information that the ZyXEL Device
sends to the DHCP client devices on the LAN.
Figure 30 Network > LAN > DHCP Server
Table 21 Network > LAN > IP
LABEL DESCRIPTION
IP Address Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
IP Subnet Mask Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your ZyXEL Device
automatically computes the subnet mask based on the IP address you
enter, so do not change this field unless you are instructed to do so.
Apply Click this to save your changes back to the ZyXEL Device.
Reset Click this to begin configuring this screen afresh.