HP (Hewlett-Packard) rx3000 Series PDAs & Smartphones User Manual


 
Troubleshooting
User’s Guide 12–10
iPAQ Mobile Media
For more information on iPAQ Mobile Media, refer to Chapter 6,
“Getting to Know iPAQ Mobile Media.”
I cannot connect
to an available
network that
shows in the list of
networks without a
name.
It is likely that the network is a “hidden” or non-SSID broadcast
network. You must know the network name (SSID) to be able to
connect.
1. Tap Start > Settings > Connections tab > Connections
> Advanced tab > Network Card.
2. Select Add New Settings.
3. Enter the network name (SSID).
4. Select the appropriate values in the Connects to: box.
5. If WEP settings are required, tap the Authentication tab
and enter them.
I cannot connect
reliably to an
available network
or connections
are frequently
dropped.
Be sure there is ample signal strength available in the
area.
If you are using one of the WLAN Power Save modes, try
changing modes or turning off Power Save. Refer to
Chapter 10, “Managing the Battery” for more information.
If you are using Extended Power Save mode, turn off
Bluetooth.
Problem Solution (Continued)