HP (Hewlett-Packard) rx3000 Series PDAs & Smartphones User Manual


 
Using Wi-Fi
User’s Guide 8–7
6. Tap OK. (Your new network is now available from the
Configure Wireless Networks list.)
7. Tap OK to exit the Configure Wireless Networks screen.
Searching for Networks to Access
Networks that you have already configured are preferred
networks and can be found on the iPAQ Wireless screen >
Settings > Wireless Networks list box. You can choose whether
to connect only to preferred networks or to have your HP iPAQ
search for and connect to any available network (preferred or
not).
To search for networks to access:
1. From the iPAQ Wireless screen, tap > Settings > Wireless
tab.
2. In the Networks to access box, tap the type of network you
want to connect to (All Available, Only access points, or
Only computer-to-computer).
3. To connect only to networks that have already been
configured, clear the Automatically connect to
non-preferred networks checkbox.
Note: If you check the Automatically connect to
non-preferred networks checkbox, your HP iPAQ detects any
new networks and provides you the opportunity to configure
them.
Managing Wireless Network Settings
In managing your wireless networks, sometimes it is necessary to
change network settings. In the next two sections, learn how to
view, edit and delete available wireless network settings.