HP (Hewlett-Packard) rx3000 Series PDAs & Smartphones User Manual


 
Using Wi-Fi
User’s Guide 8–8
Viewing or Editing a Wireless Network
To view or edit an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. From the iPAQ Wireless screen, tap Settings > Wireless tab.
3. In the Wireless networks box, tap the desired network name.
4. Edit the existing settings as necessary, and then tap OK to
save the changes.
Deleting a Wireless Network
To delete an existing or available wireless network:
1. Be sure Wi-Fi is on.
2. From the iPAQ Wireless screen, tap Settings > Wireless tab.
3. In the Wireless networks box, tap and hold the network you
want to delete.
4. Tap Remove Settings.
Monitoring Signal Strength and Status
To view the signal strength between your HP iPAQ and an access
point Wi-Fi connection:
1. Tap the Connections icon ( or ) >in the Navigation bar.
2. When the Connectivity box displays, you will be able to
view the type of network the HP iPAQ is connected to (for
example, Work or Internet) and an icon displaying the signal
strength.
Note: The Signal Strength icon will not be displayed if a
connection is not present.