HP (Hewlett-Packard) rx3000 Series PDAs & Smartphones User Manual


 
Managing the Battery
User’s Guide 10–6
To charge the HP iPAQ using the AC adapter:
1. Plug the AC adapter into an electrical outlet 1.
2. Insert the AC adapter plug into the charger adapter 2.
3. Insert the charger adapter into the bottom of the HP iPAQ 3.
Ä
CAUTION: To avoid damaging your HP iPAQ or the AC adapter,
check to be sure all connectors are properly aligned before connecting
them.
4. When the power indicator on the top of the HP iPAQ turns
solid amber, the unit is fully charged and you can disconnect
the AC adapter. The approximate time to fully charge a unit
is four hours.