Filter
Top Products
Configuring Phone Lines and Calling Routing Behavior
Managing Inbound Calls with Hunt Groups
SPA9000 Voice System Administration Guide 93
4
Syntax for Hunt Rules
•
Global Hunt Rule
(SIP page > PBX Parameters section > Hunt Groups field)
SYNTAX: extension:[name=”name”,]station[,station[,station
[…]]],hunt=hrule[,cfwd=target]
• Line-Specific Hunt Rule
(Line N page > Subscriber Information section > Contact List field)
SYNTAX: station[,station[,station[…]]],hunt=hrule;
[,cfwd=target]
Parameters
• extension: An extension number for the hunt group
• name: A name for the hunt group, which will appear in the Corporate
Directory
• station: The extension numbers; the wildcard symbols ? and * can be
used to represent one or more characters
• hunt=hrule: The hunt order, ring interval, and maximum duration, in the
following format: hunt=algo;interval;max
- algo: The hunt order.
– re: Restart. Hunting starts at the beginning of the list. If the first station
does not answer within the specified interval (see below), the hunt
proceeds through the stations in sequential order.
– ne: Next. The system determines the station that was chosen in the
previous hunt, and hunting starts with the next station in the list. If that
station does not answer within the specified interval (see below), the
hunt proceeds through the stations in sequential order.
– ra: Random order. The system randomly chooses a station from the list. If
the selected station does not answer within the specified interval (see
below), the hunt proceeds randomly through the unchosen stations until
each station is tried.
– al: All. The system rings all the stations at the same time.
- interval: The number of seconds to wait for one station to answer,
before choosing another station. If interval is *, the hunt is stopped at the
first station that starts ringing, and rings the station until it answers, or the
caller hangs up, or the station's ringer times out.