Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 231
B
Voice tab > Regional page
Vertical Service Activation Codes section
NOTE Vertical Service Activation Codes are automatically appended to the dial-plan.
There is no need to include them in dial-plan, although no harm is done if they are
included.
CPC Duration Duration in seconds for which the tip-to-ring voltage is
removed after the caller hangs up. After that, tip-to-ring
voltage is restored and dial tone applies if the attached
equipment is still off-hook. CPC is disabled if this value is set
to 0. Range: 0 to 1.000 second. Resolution is 0.001 second.
Default: 0 (CPC disabled)
Call Return Code This code calls the last caller.
Default: *69
Call Redial Code Redials the last number called.
Default: *07
Blind Transfer Code Begins a blind transfer of the current call to the extension
specified after the activation code.
Default: *98
Call Back Act Code Starts a callback when the last outbound call is not busy.
Default: *66
Call Back Deact Code Cancels a callback.
Default: *86
Call Back Busy Act Code Starts a callback when the last outbound call is busy.
Default: *05
Cfwd All Act Code Forwards all calls to the extension specified after the
activation code.
Default: *72
Cfwd All Deact Code Cancels call forwarding of all calls.
Default: *73
Cfwd Busy Act Code Forwards busy calls to the extension specified after the
activation code.
Default: *90