Filter
Top Products
Configuring Phone Lines and Calling Routing Behavior
Managing the Line Selection for Outbound Calls
SPA9000 Voice System Administration Guide 81
4
• Wildcard characters
EXAMPLE: (<:L1>51*,577?)
In this example, Line 1 can be used when either of the following number
patterns is dialed:
• The user dials a number that starts with 51, followed by any other
characters.
• The user dials any four-digit number starting with 577.
Entering a Call Routing Rule
Use the following procedure to enter a call routing rule.
STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
STEP 2 Click Voice tab > SIP.
STEP 3 Scroll down to the PBX Parameters section.
STEP 4 In the Call Routing Rule field, enter the rule that you want to apply
STEP 5 Click Submit All Changes.
STEP 6 To verify your progress, place a call to a phone that has caller ID, and confirm that
the expected number appears.