Filter
Top Products
SPA400 Field Reference
Setup
SPA9000 Voice System Administration Guide 262
C
Setup tab>
Basic Setup
Setup tab>
SPA9000 Interface
Network Setup
Dynamic IP Address
(DHCP Client)
Select this button to obtain an IP address through DHCP.
Fixed IP address is the recommended setting.
Default setting: Dynamic IP Address
Fixed IP Address Select this button to assign a static IP address to the SPA400.
This is the recommended configuration.
IP Subnet Mask Subnet mask
Gateway IP Address IP address of the Gateway/Router
Domain Name Server (DNS) Address
Primary DNS IP address of the primary domain name server
Secondary DNS IP address of the secondary domain name server
NTP
NTP Server 1 IP address or FQDN of a NTP server
Time Zone Select the time zone
Syslog Server The IP address of the syslog server to which the SPA9000
sends syslog messages. Leave blank if you do not want to
receive syslog messages.
SPA9000 User ID
User ID The User ID of the SPA9000
This value must be identical to the User ID that is entered on
the SPA9000 line interface page for this SPA400 device.