Filter
Top Products
Administering the SPA400 and Voice Mail Service
Configuring a SPA400 for Voice Mail Service
SPA9000 Voice System Administration Guide 113
5
Configuring Local Voice Mail Service on a SPA400
You need to configure the voice mail server and set up the voice mail boxes for the
users.
NOTE The settings on this page correspond to the settings on the SPA9000 Voice > Line
page. See “Configuring a Line Interface for a SPA400 (PSTN or Voice Mail),” on
page 60.
STEP 1 Connect to the SPA400 administration web server. (See “Connecting to the
SPA400 Administration Web Server,” on page103.)
STEP 2 Click Setup tab > Voicemail Server.
STEP 3 Enter the following information:
• Server Port: 5090
The voice mail server uses this UDP port to listen for signalling between the
SPA400 and the SPA9000. This port must be different from the port number
that you entered on the SPA9000 Interface page.
• SPA9000 subscriber ID: 8888
The SPA9000 uses the subscriber ID to subscribe to the SPA400 Voice mail
Server for obtaining notification.
SPA400 > Setup > Voicemail Server
SPA9000 > Voice > Line N