Filter
Top Products
Configuring Phone Lines and Calling Routing Behavior
Configuring Line Interfaces on the SPA9000
SPA9000 Voice System Administration Guide 65
4
Setting the Call Capacity Parameter
You can set the maximum total number of incoming and outgoing calls on each line
interface. The default value is unlimited. You can set a value from 1 to 15, or leave
the setting as unlimited.
NOTE The SPA9000 does not distinguish between incoming and outgoing calls for call
capacity.
STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
STEP 2 Click Voice tab > Line
N
, where N represents the line interface number.
STEP 3 Scroll down to the Subscriber Information section.
From the Call Capacity drop-down list, choose the maximum number of calls to
allow.
SPA9000 Voice > Line: Subscriber Information
STEP 4
Click Submit All Changes.