Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 255
B
Voice tab > Line page
Subscriber Information section
Refer Target Bye Delay For the Refer Target Bye Delay, enter the appropriate period
of time in seconds.
Default: 0
Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of
time in seconds.
Default: 0
Refer-To Target Contact To contact the refer-to target, select yes. Otherwise, select
no.
Default: no
Auth INVITE When enabled, authorization is required for initial incoming
INVITE requests from the SIP proxy.
Display Name Display name for caller ID.
User ID User ID assigned by the ITSP, often the same as the DID.
Password Password for this User ID.
Use Auth ID To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use the
user ID and password.
Default: no
Auth ID Authentication ID for SIP authentication.
Call Capacity Maximum number of calls allowed on this line interface. You
can set a value from 1 to 15, or leave the setting as unlimited.
Note that the SPA9000 does not distinguish between
incoming and outgoing calls when talking about call capacity.
NOTE Unlimited = 16.
Default: unlimited
Contact List List of client stations that the SPA9000 alerts when there is
an incoming call to the line interface from the ITSP.
Cfwd No Ans Delay Delay, in seconds, before the call forwarding of no-answer
calls feature is triggered.
Default: 20