Filter
Top Products
Localization
Localizing the SPA400 Call Disconnect Tones
SPA9000 Voice System Administration Guide 161
8
e. If desired, make a backup copy of the existing sounds folder.
NOTE You are not overwriting any user message files in this procedure.
However, it is a good practice to make a backup copy of your files
before doing any upgrades.
f. Move the new sounds folder into spa400vm\var\lib on the USB drive. When the
Confirm Folder Replace window appears, click Yes to All.
g. Remove the USB drive from the PC and insert it into the SPA400.
h. Power on the SPA400.
STEP 4 Place a test call to the voice mail system to confirm that the new language
prompts are used.
Localizing the SPA400 Call Disconnect Tones
One important aspect of VoIP-PSTN integration is the Call Disconnect operation.
This operation allows the gateway to detect that the call has been terminated on
the other end, so the local line hangs up automatically. Detecting the tone cadence
of the Call Disconnect signal is a trigger for closing the loop.
Each country has its own Call Disconnect Signal tone which needs to be
configured on the SPA400
To n e
page. See Table 3, ‘SPA400 Call Processing
Tones,” on page161.
Table 3 SPA400 Call Processing Tones
Country First Tone 2nd
(optional)
3rd
(optional)
4th
(optional)
Repeat
Count
On
(ms)
Off
(ms)
On
(ms)
Off
(ms)
On
(ms)
Off
(ms)
On
(ms)
Off
(ms)
Australia 360 385 360 385 5
Denmark 430 465 430 270 1
France 490 510 1