Filter
Top Products
Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide 40
2
STEP 3 To v i e w t h e Telephone Configuration page for any station, click the hyperlink in
the IP Address column. For information about the telephone configurations, see
the Linksys Phone Administration Guide.
Using the Interactive Voice Response Unit
In addition to the administration web server, the SPA9000 is equipped with an
Interactive Voice Response unit (IVR) that allows you to perform certain
administrative tasks by using an analog phone that is connected to the SPA9000.
• “Using the IVR Menu,” on page 40
• “Entering a Password through the IVR,” on page 45
Using the IVR Menu
To use the IVR menu, complete the following steps.
STEP 1 Connect an analog telephone to the Phone 1 or Phone 2 port of the SPA9000.
STEP 2 Press **** (quickly press the star key four times).
STEP 3 Wait until you hear “Linksys configuration menu.”
STEP 4 Refer to Table1 ‘IVR Options” on page 41 to identify the required option.
STEP 5 Enter the required option followed by the # (pound) key.
• To enter a period, use the star key (*).
• When entering a value, such as an IP address, to exit without entering any
changes, press the * (star) key twice within half a second. Otherwise, the * is
treated as a decimal point.
• After entering a value, such as an IP address, press the # (pound) key to
indicate you have finished your selection.
• To save a new setting, press 1. To review a new setting, press 2. To re-enter a
setting, press 3. To cancel your entry and return to the main menu, press *
(star).