Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 225
B
Second Dial Tone Alternative to the Dial Tone when the user dials a three-way
call.
Default: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone Alternative to the Dial Tone. It prompts the user to enter an
external phone number, as opposed to an internal extension.
It is triggered by a, (comma) character encountered in the dial
plan.
Default: 420@-16;10(*/0/1)
Prompt Tone Prompts the user to enter a call forwarding phone number.
Default: 520@-19,620@-19;10(*/0/1+2)
Busy Tone Played when a 486 RSC is received for an outbound call.
Default: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone Played when an outbound call has failed or after the far end
hangs up during an established call. Reorder Tone is played
automatically when <Dial Tone> or any of its alternatives
times out.
Default: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone Played when the caller has not properly placed the handset
on the cradle. Off Hook Warning Tone is played when
Reorder Tone times out.
Default: 480@10,620@0;10(.125/.125/1+2)
Ring Back Tone Played during an outbound call when the far end is ringing.
Default: 440@-19,480@-19;*(2/4/1+2)
Confirm Tone Brief tone to notify the user that the last input value has been
accepted.
Default: 600@-16; 1(.25/.25/1)
SIT1 Tone Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The RSC to trigger this
tone is configurable on the SIP
screen.
Default: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/
0/2,.380/0/3,0/4/0)
SIT2 Tone Alternative to the Reorder Tone played when an error occurs
as a caller makes an outbound call. The response status code
(RSC) to trigger this tone is configurable on the SIP
screen.
Default: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/
0/2,.380/0/3,0/4/0)