Filter
Top Products
Configuring Phone Lines and Calling Routing Behavior
Configuring Line Interfaces on the SPA9000
SPA9000 Voice System Administration Guide 61
4
STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin
Login and then click Advanced.
STEP 2 Click Voice tab > Line
N
, where N represents the line interface number.
STEP 3 From the Line Enable drop-down list, choose yes.
STEP 4 Enter the following information:
• User ID: Enter a user ID, such as 9000.
This entry must exactly match the user ID on the SPA400 Setup > SPA9000
Interface page, User ID field. For more information, see “Configuring a SPA400
to Interoperate with the SPA9000,” on page108.
• Proxy: Enter the IP address of the SPA400.
• Register Expires: 60
This setting ensures that the SPA9000 and SPA400 are resynchronized every
60 seconds. This setting ensures that any changes in settings are synchronized
on both devices.
SPA9000 Voice > Line: Subscriber Information, Proxy and Registration