Filter
Top Products
Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide 41
2
For example, to enter the IP address
191.168.1.105
by keypad, press the
following keys: 191*168*1*105. Press the # (pound) key to indicate that you
have finished entering the IP address. Then press 1 to save the IP address, or
press the * (star) key to cancel your entry and return to the main menu.
• If the menu is inactive for more than one minute, the SPA9000 times out. You
need to re-enter the menu by pressing ****.
STEP 6 To exit the menu, hang up the telephone.
The settings that you have saved take effect after you hang up the telephone. The
SPA9000 may reboot at this time.
Table 1 IVR Options
The following table shows the codes that you enter to complete various tasks in
the IVR.
IVR Action IVR
Menu
Choice
Parameters Notes
Enter IVR Menu * * * * None Ignore SIT or other tones
until you hear, “Linksys
configuration menu. Please
enter option followed by
the pound key or hang-up
to exit.”
Exit IVR Menu 3948 None
Check DHCP 100 None The IVR spells "S,T,A,T,I,C" if
the setting is for a static IP
address or "D,H,C,P" for a
DHCP IP address.
Enable/Disable
DHCP
101 Enter 0 to enable
Enter 1 to disable
Requires password
Check WAN IP
Address
110 None IVR announces the current
IP address of the WAN port.