Filter
Top Products
Administering the SPA400 and Voice Mail Service
Configuring a SPA400 for PSTN Access
SPA9000 Voice System Administration Guide 111
5
line. The call is directed according to the Contact List. Also, in the SPA400 web
configuration page, click the Status tab, and then verify that a voltage value
appears in the Battery Level section.
SPA400 Administration > Status: Battery Level
NOTE If the battery level is 0 V on a line that you have connected to the PSTN,
troubleshoot the phone wiring.
• Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. Click Voice tab > Info. Scroll down to the Line 2
Status section, and verify that the
Registration Status
is
Registered
.
STEP 12 Click Save Settings.
NOTE If you are using this SPA400 for voice mail service, continue to “Configuring
a SPA400 for Voice Mail Service,” on page112.
Configuring a SPA400 for PSTN Access
Typically, there is no need to change the default settings on the Voice page. Make
changes only if a problem is suspected and only after consulting with a service
technician from your telephone service provider. It is essential that the settings on
your system are compatible with those of the Central Office.