Filter
Top Products
Localization
Local Time Configuration
SPA9000 Voice System Administration Guide 154
8
Local Time Configuration
You will need to localize the date, time, and daylight saving time rule. See “Setting
the Date and Time,” on page 30 and “Configuring Daylight Saving Time,” on
page 31. Use the following table to find the correct Daylight Saving Time Rules for
EMEA and Australia.
Table 1 SPA9000 Daylight Saving Time Rules
Configuring the SPA9000 and SPA9xx Call Progress Tones
Call progress tones, such as dial tone and reorder, indicate the call progress to the
users. You can configure your SPA9000 and your SPA9xx phones to use the
appropriate call progress tones for your region.
STEP 1 Localize the tones for the SPA9000:
a. Start Internet Explorer, and then enter the IP address of the SPA9000. Click
Admin Login and then click Advanced.
b. Click Voice tab > Regional.
c. In the
Call Progress Tones
section, enter the values from Table 3-1 into the
corresponding fields.
d. Click Submit All Changes.
Country Daylight Saving Time Rule Time Zone
Australia (ACST) start=4/1/7/3;end=10/1/7/2;save=-1 GMT+10:30
Australia (AEST) start=4/1/7/3;end=10/1/7/2;save=-1 GMT+11
Australia (AWST) start=3/-1/7/3;end=10/-1/7/2;save=¬1 GMT+09:00
France start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
Germany start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
Spain start=3/-1/7/2;end=10/-1/7/2;save=1 GMT+1
UK/Ireland start=3/-1/7/2;end=10/-1/7/2;save=1 GMT