Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 198
B
Voice tab > Info page >
System Status section
Voice tab > Info page >
FXS 1/2 Status section
Client Certificate The status of the client certificate, which authenticates the
SPA9000 for use in the ITSP network
Customization For an remote configuration (RC) unit, this field indicates
whether the unit has been customized or not. Pending
indicates a new RC unit that is ready for provisioning. If the
unit has already retrieved its customized profile, this field
displays the name of the company that provisioned the unit.
Licenses When populated with the value K0, indicates that the
SPA9000 is licensed for up to 16 users; if this field is blank,
install firmware version 5.2.5 or higher.
Current Time The current date and time of the system; for example, 10/3/
2003 16:43:00
Elapsed Time The total time elapsed since the last reboot of the system; for
example, 25 days and 18:12:36
Hook State The readiness of the device that is connected to the
corresponding Phone port on the SPA9000
• On: Ready for use
• Off: In use
Message Waiting Indicates whether the station assigned to the FXS port has
new voicemail waiting: Yes or No
Call Back Active Indicates whether a call back request is in progress: Yes or
No
Last Called Number Last number called
Last Caller Number Number of the last caller if available from caller ID, example
4085551212
Call 1/2 State Status of the call:, Ringing, Idle, or Connected
Call 1/2 Tone Type of tone used by the call, for example Ring Back 2 for
inbound call or None for outbound call
Call 1/2 Encoder Codec used for encoding