Filter
Top Products
Advanced Topics in SPA9000 Administration
Remote Provisioning Features
SPA9000 Voice System Administration Guide 187
A
The following table lists the variables used in these XML files.
Table 1 Variables Used in XML Configuration Files
Client stations download spa$PSN.cfg and init_$MA.xml only once for initial
configuration. However, they download generic.xml on every reboot. Therefore,
parameters manually configured on the client station that overlap with the
contents of generic.xml are overwritten with the SPA9000-supplied values. The
list of parameters included in generic.xml are thus purposely kept to a very small
set.
Variable Description
spa-9000-ip-address IP address of the SPA9000 SIP Proxy.
proxy-listen-port Port at which the SPA9000 SIP Proxy is listening.
This value is configured in <Proxy Listen Port>.
client-station-mac-
address
This is the MAC address of the client station who is
requesting the profile /cfg/init_$MA.xml (in other
words, the $MA portion of the requested filename).
next-available-user-id The current value of <Next Auto User ID>.
Phone-upgrade-rule Upgrade rule to be used by the client stations. This
value is configured in <Phone Upgrade Rule>.
Phone-dial-plan Dial plan to be used by the client stations. This
value is configured in <Phone Dial Plan>.
time-zone <Time Zone> value that is configured on the
SPA9000.
daylight-saving-time <Daylight Saving Time Rule> value that is
configured on the SPA9000.
phone-ext-password <Phone Ext Password> value configured on the
SPA9000.
spa-9000-admin-passwd <Admin Passwd> value configured on the
SPA9000.
spa-9000-multicast-
address
<Multicast Address> value configured on the
SPA9000.