Filter
Top Products
Basic Administration of the SPA9000
Configuring Basic Settings
SPA9000 Voice System Administration Guide 32
2
Enter these values in the following format: <month>/<day>/<weekday>[/
HH[:mm[:ss]]]
• <month>: 1-12 (January-December)
• <day>: 1-31
• <weekday>: Optional. If included, this value causes the rule to take effect on
a particular day of the week before or after the specified date. Use the
values 1-7 to represent the days Monday (1) through Sunday (7). Omit this
parameter or enter 0 to cause the rule to take effect exactly on the specified
date. If <weekday> is not 0 and the <day> value is positive, then daylight
saving time starts or ends on <weekday> on or after the specified date. If
<weekday> is not 0 and the <day> value is negative, then daylight saving
time starts or ends on <weekday> on or before the specified date.
• HH:mm:ss: Optional. The time of day when the setting takes effect, in hours
(0-23), minutes (0-59), and seconds (0-59)
• <save-time>: The number of hours (and optionally minutes and/or seconds)
to add to the NTP server time during daylight saving time. Enter a negative (-)
sign before <save-time> if subtraction is desired instead of addition.
Entering the Daylight Saving Time Rule
Follow this procedure to configure daylight saving time on your SPA9000 Voice
System.
STEP 1 Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See “Connecting to the SPA9000 Administration Web
Server,” on page 27).
STEP 2 Click Voice tab > Regional.
STEP 3 Scroll down to the Miscellaneous section.
STEP 4 Enter the rule in the Daylight Saving Time Rule field.
STEP 5 Click Submit All Changes.