Filter
Top Products
Basic Administration of the SPA9000
Configuring Basic Settings
SPA9000 Voice System Administration Guide 31
2
NOTE Do not use the date/time settings on the Voice > Regional page to set your system
time.
STEP 1 Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See “Connecting to the SPA9000 Administration Web
Server,” on page 27).
STEP 2 Click Router tab > Wan Setup.
STEP 3 Scroll down to the Optional settings section.
STEP 4 Enter the fully qualified domain name of the NTP server that you want to use, such
as time.nist.gov.
STEP 5 Click Submit All Changes.
STEP 6 Click Voice tab > Regional.
STEP 7 Scroll down to the Miscellaneous section.
STEP 8 From the Time Zone drop-down list, choose your local time zone.
STEP 9 Click Submit All Changes.
Configuring Daylight Saving Time
You can enter a daylight saving time rule to ensure that the time is adjusted
appropriately for your region.
Syntax and Examples
SYNTAX: start = <start-time>; end=<end-time>; save = <save-
time>
EXAMPLE: start=3/9/7;end=11/2/7;save=1
In this example, Daylight Saving Time begins March 9, 2007, and ends Nov. 2, 2007.
One hour is added to the time of day during this period.
• <start-time>: The start date/time of daylight saving time
• <end-time>: The end date/time of daylight saving time