Filter
Top Products
Configuring Phone Lines and Calling Routing Behavior
Managing Inbound Calls with the Contact List
SPA9000 Voice System Administration Guide 91
4
Entering a Contact List Rule
Use the following procedure to enter a contact list rule.
STEP 1 Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings.
STEP 2 Click Voice tab > Line
N
, where N represents the line interface number.
STEP 3 Scroll down to the Subscriber Information section.
SPA9000 Voice > Line: Subscriber Information
STEP 4
Enter the desired rules in the Contact List field. For more information, see “Example
Contact List Rules,” on page 86 and “Entering a Contact List Rule,” on page 91.
NOTE The maximum length of the <Contact List> parameter is 383 characters.
STEP 5 If you included a call forward rule, modify the
Cfwd No Ans Delay
parameter to
specify the number of seconds that elapse before a call is considered to be
unanswered.
STEP 6 Click Submit All Changes. The SPA9000 reboots.
STEP 7 To verify your progress, make an inbound call and verify that the call is handled as
you intended.