Filter
Top Products
Localization
Localizing the SPA400 Caller ID Method
SPA9000 Voice System Administration Guide 163
8
STEP 4 Click Save Settings.
STEP 5 On the menu, click Setup > Voice.
STEP 6 Scroll down to the Te ar Dow n FXO Por t field, and enter 0. Refer to the following
illustration.
SPA400 Setup tab > Voice page: Line Settings section
STEP 7
Click Save Settings.
STEP 8 To restart the SPA400, complete the following steps:
a. Click Administration > Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
d. When the
Reboot OK
. Go to Setup page? message appears, click OK.
Localizing the SPA400 Caller ID Method
You need to identify the caller ID method to use in your country.
STEP 1 Click Setup tab > Voice.
STEP 2 Scroll down to the
Line Settings
section.
STEP 3 From the
Caller Id and CP Tone Method
drop-down list, choose your region.
SPA400 Setup tab > Voice page