Filter
Top Products
Basic Administration of the SPA9000
Configuring Basic Settings
SPA9000 Voice System Administration Guide 34
2
Setting the Multicast Address
For administration purposes, the SPA9000 can send the following reboot, restart,
page, and ring messages to the group:
• Graceful reboot: The device reboots when there are no calls in progress.
• Immediate reboot: The device reboots immediately.
• Graceful restart: The device restarts when there are no calls in progress.
• Immediate restart: The device restarts immediately.
• Group page start: One-way audio is sent from the caller to all other phones.
• Group page end: An active page is terminated.
• Get ringing calls: When a user chooses Group Pickup on a phone, the SPA9000
gathers information about all ringing phones and reports this information to the
requesting phone.
STEP 1 Connect to the SPA9000 administration web server, and choose Admin access
with Advanced settings. (See “Connecting to the SPA9000 Administration Web
Server,” on page 27).
STEP 2 Click Voice tab > SIP.
STEP 3 Scroll down to the PBX Parameters section.
STEP 4 Enter the correct multicast address in the Multicast Address field.
Voice tab > SIP > PBX Parameters Section
NOTE The default value is 224.168.168.168:6061.