Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 243
B
SIP Debug Option SIP messages are received at or sent from the proxy listen
port. This feature controls which SIP messages to log. The
choices are as follows:
none—No logging.
1-line—Logs the start-line only for all messages.
1-line excl. OPT—Logs the start-line only for all messages
except OPTIONS requests/responses.
1-line excl. NTFY—Logs the start-line only for all messages
except NOTIFY requests/responses.
1-line excl. REG—Logs the start-line only for all messages
except REGISTER requests/responses.
1-line excl. OPT|NTFY|REG—Logs the start-line only for all
messages except OPTIONS, NOTIFY, and REGISTER
requests/responses.
SIP Debug Option
(continued)
full—Logs all SIP messages in verbose mode.
full excl. OPT—Logs all SIP messages in full text except
OPTIONS requests/responses.
full excl. NTFY—Logs all SIP messages in full text except
NOTIFY requests/responses.
full excl. REG—Logs all SIP messages in full text except
REGISTER
requests/responses.
full excl. OPT|NTFY|REG—Logs all SIP messages in full text
except for OPTIONS, NOTIFY, and REGISTER requests/
responses.
Default: none
Restrict Source IP If line interfaces use the same SIP Port value and the Restrict
Source IP feature is enabled, the proxy IP address for Lines 1
and 2 is treated as an acceptable IP address for both lines. To
enable the Restrict Source IP feature, select yes. Otherwise,
select no.
A source IP address is untrusted if it does not match any of
the IP addresses resolved from the configured Proxy or
Outbound Proxy if Use Outbound Proxy is set to yes.
Default: no