Filter
Top Products
SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide 244
B
Voice tab > FXS 1/2 page
Subscriber Information section
Voice tab > FXS 1/2 page
Dial Plan section
Referor Bye Delay Controls when the SPA9000 sends BYE to terminate stale call
legs after completion of call transfers. Multiple delay settings
(Referor, Refer Target, Referee, and Refer-To Target) are
configured on this screen. For the Referor Bye Delay, enter
the appropriate period of time in seconds.
Default: 4
Refer Target Bye Delay For the Refer Target Bye Delay, enter the appropriate period
of time in seconds.
Default: 0
Referee Bye Delay For the Referee Bye Delay, enter the appropriate period of
time in seconds.
Default: 0
Refer-To Target Contact To contact the refer-to target, select yes. Otherwise, select
no.
Default: no
Sticky 183 If this feature is enabled, the IP telephony ignores further 180
SIP responses after receiving the first 183 SIP response for
an outbound INVITE. To enable this feature, select yes.
Otherwise, select no.
Default: no
Display Name Display name for caller ID.
User ID Extension number for this line.
Dial Plan Dial plan script for this line.