Filter
Top Products
Basic Administration of the SPA9000
Connecting to the SPA9000 Administration Web Server
SPA9000 Voice System Administration Guide 27
2
Connecting to the SPA9000 Administration Web Server
To connect to the administration web server, perform the following steps.
NOTE You should have previously connected and configured the SPA9000 as described
in the SPA9000 Voice System Installation Guide.
STEP 1 Start Internet Explorer on a computer that is on the same network as the SPA9000.
STEP 2 Enter the IP address of the SPA9000.
NOTE To find the IP address of the SPA9000, connect an analog telephone to the
Phone 1 or Phone 2 port on the
SPA9000. Then lift the receiver of the phone
and press **** on the keypad to access the IVR menu. Press 110# to hear the
IP address.
STEP 3 To view administrative features, click Admin Login and then click Advanced. By
default, no password is required. For more information, see “Setting Passwords for
User and Administrator Accounts,” on page 29.
ALTERNATIVELY: After starting Internet Explorer, enter: <SPA9000_ipaddress>/
admin/advanced
Saving or Discarding Changes SPA9000
Changes can be saved or discarded at any time.
• Changes are submitted only when you click the Submit All Changes button at
the bottom of a page. When changes are saved, the
SPA9000 may reboot,
depending on the type of changes.
• To discard unsubmitted changes, click the Undo All Changes button at the
bottom of the page.