Filter
Top Products
Do Not Disturb
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
When you are busy and do not want to receive calls, you can touch the Do
Not Disturb button, if you have programmed one onto your voice terminal.
When you receive outside calls, the green light next to the line button flashes,
but your voice terminal does not ring.
Calls transferred to you return to the sender, and intercom calls get a busy
signal.
When you activate the Do Not Disturb at your voice terminal, the green light
goes on next to your Auto Intercom button at other people's voice terminals.
None
None
The Do Not Disturb feature requires a button with lights.
To program a Do Not Disturb button for your voice terminal:
1 Label the button Do Not Disturb.
2
Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
3
Touch the button you want to program.
4
Dial *71.
5
Slide the T/P switch to the center position.
HOW TO USE
To prevent calls from ringing at your voice terminal:
1
Touch Do Not Disturb.
The green light next to the button goes on.
This feature remains active until you:
1 Touch Do Not Disturb again.
The green light next to the button goes off.
MERLIN Plus System Features
5-31