Filter
Top Products
The system features that can be printed on the System Feature Report are:
CONSIDERATIONS
ADMINISTRATION
5-68
Section 5: Reference
●
●
●
●
●
●
Group Page groups
Call restrictions for each voice terminal
Allowed list assignments for each voice terminal
Transfer Return Interval
Call Report settings, such as the minimum call duration of a call for
which the Call Report feature will print information
System Speed Dial numbers
The voice terminal features that can be printed on the System Feature Report
are:
●
●
●
●
●
●
The intercom number of the voice terminal
The voice terminal model type
Optional accessories used with the voice terminal
Voice Announcement Enable/Disable
Automatic Line Selection preferences
The lines and features assigned to all buttons on the voice terminal
The System Feature Report feature can be accessed only from the
administrator/attendant console.
If the system administrator wants to have the date and time on the System
Feature Report, the administrator must set these options on the control unit
when he or she administers the date and time for the Call Report feature.
(See "Call Report.")
The system administrator can connect the data collector and the printer to
any voice terminal jack in the system, except jack 10. However, if the
administrator has already assigned the data collector and the printer to a voice
terminal jack for the Call Report feature, usually jack 19, it is best to use the
same jack assignment for the System Feature Report.
If your responsibilities do not include system administration, skip this
information.
To set the date and the time, to assign a voice terminal jack for the System
Feature Report, and to print or to cancel a report, use the following
procedures.
The Date and the Time. (If you have already set the date and time for the
Call Report feature, you don't have to do it again.)
To set today's date:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2
Dial *80.