AT&T 999-507-144 Answering Machine User Manual


 
NOTE: You cannot administer this feature with a 10-button voice
terminal. You must have a 34-button administrator/attendant console
to assign allowed lists to voice terminals.
In order to assign an allowed list to a restricted voice terminal, you first have
to set up the allowed list in the system's memory. To set up an allowed list,
do the following:
Set Up Allowed Lists
1
2
3
4
5
6
7
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial the code for the list you want to set up.
(The codes are *01 through *08 for List 01 through 08 in the directory.)
Dial the 2-digit "Item" number (01 through 10 in the Allowed List
Directory) for the number you are adding to the list.
Dial the number you are adding to the list (a maximum of six digits).
The console beeps twice on the sixth digit to confirm the entry and remind you that you can't
enter another digit to this list entry.
The console does not beep when you enter a number with fewer than six digits to the list.
Touch Administer.
The console beeps twice.
To add another number to the same list, repeat steps 2 through 5.
NOTE: You must begin each entry to List 01 by dialing *01, each entry to
List 02 by dialing *02, etc.
Repeat steps 2 to 6 to set up another list, or leave administration mode.
Delete a Number from
an Allowed List
To delete a number from an allowed list already in the system's memory, do
the following:
Remove All Numbers
from an Allowed List
1
2
3
4
5
6
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial the code for the list.
(The codes for Lists 01 through 08 are *01 through *08.)
Dial the "Item" number (01 through 10) of the number you want to delete.
Touch Drop.
Touch Administer.
The console beeps twice.
Continue to administer the system, or leave administration mode.
1
2
3
4
5
To clear all entries from a list, do the following:
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial the code for the list you want to clear.
(The dial codes for Lists 01 through 08 are *01 through *08.)
Touch Drop.
Touch Administer.
The console beeps twice.
Continue with administration, or leave administration mode.
3-18
Section 3: Administering the System