Filter
Top Products
Type of Documented Calls. To specify the type of calls that will be
documented (the system is set to have no calls reported):
1
2
3
4
5
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *84.
Dial a number code 0 through 2 to specify the kind of calls to be reported
(the system is factory-set so that no calls are reported):
– If you do not want any calls reported, dial 0.
– If you want only outgoing calls reported, dial 1.
– If you want outgoing and incoming calls reported, dial 2.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
PROGRAMMING
HOW TO USE
None
None
Call Restriction
DESCRIPTION
When the system is first installed, people can use their voice terminals to
place intercom, local, and toll calls. However, the system administrator can
assign either of two types of call restrictions for selected voice terminals:
●
Outward Call Restriction restricts voice terminals so that only
intercom calls can be placed.
●
Toll Call Restriction restricts voice terminals so that only intercom
and local calls can be placed.
CONSIDERATIONS
Even if a voice terminal has Outward Call Restriction, the person can bridge
onto calls in progress, answer incoming calls, and place and receive intercom
calls.
If the outward call restrictions are too limiting, the administrator can
designate a list of numbers that individuals may call beyond the established
restrictions. (See "Allowed Lists.")
5-24
Section 5: Reference