Filter
Top Products
Transfer Return Interval
DESCRIPTION
When someone in the MERLIN Plus system transfers a call and it is not
answered, the call returns to the sender. When the system is first installed, it
is set to return calls after three rings. The system administrator can change
that setting so that calls ring as many as nine times before they return to the
person who has transferred it. The administrator may also choose to set the
system not to return transferred calls at all.
CONSIDERATIONS
ADMINISTRATION
None
If your responsibilities do not include system administration, skip this
information.
To administer the Transfer Return Interval for your system:
1
Enter administration mode by sliding the T/P switch to P and touching
Administer.
2
Dial a code between *20 and *29 where:
*20 programs the system not to return transferred calls
*21 programs the system to transfer calls after one ring.
*29 programs the system to transfer calls after nine rings.
3
Touch Administer.
The console beeps twice.
4
Leave administration mode by sliding the T/P switch to the center
position.
PROGRAMMING
None
HOW TO USE
Ask your system administrator what Transfer Return Interval is set for your
system.
Voice Announcement Enable/Disable
DESCRIPTION Ordinarily, people can use the MERLIN Plus system intercom feature to
announce calls through your voice terminal speaker. However, if you do not
want a voice announcement to interrupt your work, you can use the Voice
Announcement Disable feature to have intercom calls ring at your voice
terminal instead.
MERLIN Plus System Features 5-83