Filter
Top Products
You can use a programmed button or a dial code for the Hold Retrieve
feature.
To use a Retrieve Call button to retrieve a held call:
1
Touch Retrieve Call.
To use a dial code to retrieve a held call:
2
Dial #*.
Intercom
DESCRIPTION
Each voice terminal connected to the MERLIN Plus system has a unique
2-digit intercom number. You can dial intercom numbers to place calls to
people connected to the system.
CONSIDERATIONS
ADMINISTRATION
5-38
Section 5: Reference
In the MERLIN Plus system, you place an intercom call with a voice
announcement. Your coworker hears your voice through the voice terminal
speaker, but must lift the handset to respond to you. If a person has a 10-
button HFAI or a 34-button BIS voice terminal, he or she can speak to you
without lifting the handset.
However, if the person you are calling has activated the Voice Announcement
Disable feature, your intercom call rings rather than beeps at the person's
voice terminal and you cannot give your voice announcement. (See "Voice
Announcement Enable/Disable.")
If you program an Auto Intercom button for the intercom number you want to
call, you can dial the number with one touch. (See "Auto Intercom.")
Since a voice announcement does not interrupt an outside call in progress,
you can announce an intercom call to a person busy on another line.
None
If you do not finish dialing an intercom number within fifteen seconds of the
time you lift the handset, the line becomes available again.