Filter
Top Products
Hold Retrieve
DESCRIPTION
If you have a 5-button voice terminal and do not have a line button for a call
that you have received or that has been transferred to you, you can still put it
on hold using the Hold button. To retrieve the call, you can use a dial code
or program a Retieve Call button.
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
To use this feature, you can either program a button or use a dial code.
If your system administrator has set your voice terminal for Button-Free Line
Operation, you should have a Hold Retrieve button on your voice terminal.
(See "Button-Free Line Operation.")
None
To program a Hold Retrieve button for your voice terminal:
1
Label the button Retrieve Call.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
3 Touch the button you want to program.
4 Dial *95*.
5
Slide the T/P switch to the center position.
You can use a programmed button or a dial code to access this feature.
To put a call on hold:
1
Touch Hold.
MERLIN Plus System Features 5-37