Filter
Top Products
To place an intercom call using a Manual Signaling button:
1
2
3
4
Touch Intercom.
Touch Speaker.
Touch the Manual Signaling button for the person you want to call.
When you haer a beep, lift your handset.
Message
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
When the light next to the Message button is on, your MERLIN Plus system
attendant has a message for you.
Your Message light can only be turned on from the administrator/attendant
console.
Note that 5-button voice terminals do not have a Message button. Therefore,
the attendant will have to use another method to let these people know that
they have a message waiting.
None
None
The system attendant can turn on the light next to the Messge button at a
person's voice terminal.
1 At the administrator/attendant console, touch Send Message.
2
Touch the Auto Intercom button for the person's voice terminal.
The red light next to the Auto Intercom button goes on, indicating the person's light is lit..
If the attendant is using a 10-button voice terminal as the attendant console,
refer to "Send Message" for directions on sending a message to voice terminals
in the system.
A person can turn off the Message light on his or her voice terminal.
1
Touch Message.
5-46
Section 5: Reference