Filter
Top Products
Control Unit Jack Assignment for the Call Report Feature. To specify the
voice terminal jack to which the data collector and the printer will be
connected (the system is factory-set for jack 19; if you are using a 10-button
voice terminal for administration, you cannot change this assignment):
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *82.
The green light goes on next to the Auto Intercom button that corresponds with the jack to
which the data collector and the printer are currently assigned.
Touch the Auto Intercom button of the jack to which the data collector
and the printer are now connected.
The green light goes off.
Touch the Auto Intercom button of the jack to which the data collector
and the printer will be connected.
The green light next to the button goes on.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
Minimum Call Duration. To specify a minimum call duration other than 1
minute for call reporting:
1 Enter administration mode by sliding the T/P switch to P and touching
Administer.
2 Dial *83.
3
Dial one digit from 0 to 9 for the number of minutes.
For example, to specify a minimum duration of 1 minute, dial *83 1. To
specify a minimum duration of 9 minutes, dial *83 9.
4 Touch Administer.
The console beeps twice.
5
Leave administration mode by sliding the T/P switch to the center
MERLIN Plus System Features
5-23