Filter
Top Products
PROGRAMMING
1
2
3
4
5
HOW TO USE
T
O program a general Account Number Enter button (program this feature on
a button with lights):
Label the button Account Number Enter.
Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
Touch the button you want to program.
Dial *82.
Slide the T/P switch to the center position.
To program a button for a specific account number or System Speed Dial code
assigned to an account number:
1
2
3
4
5
Label the button Account Number plus the name of a client or project.
Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
Touch the button you want to program.
Dial *88 plus the account number.
or
Dial *95 plus the right # code number from 60 through 99 from a list that
your administrator can give you. You do not need to include the # when
you dial.
Slide the T/P switch to the center position.
To use a general Account Number Enter button:
1
While you have a call in progress, touch Account Number Enter.
The green light next to the button goes on.
2
Dial the account number for the account to which you want to charge the
call.
or
Dial a System Speed Dial code (#60 through #99) for the account number
to which you want to charge the call.
3
Touch Account Number Enter again.
The green light goes off.
5-6 Section 5: Reference