Filter
Top Products
Assign or Remove
Allowed Lists
Use this procedure to assign an allowed list to a voice terminal or to remove
an allowed list from a voice terminal. Your Call Restrictions and Allowed
Lists Directory should show which lists to assign to each voice terminal.
To
1
2
3
4
5
6
assign or remove an allowed list, do the following:
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial the code for the list you want to assign.
(The codes for Lists 01 through 08 are *01 through *08.)
Dial 00.
Green lights go on next to the Auto Intercom buttons for the voice terminals to which this list is
already assigned.
Touch the Auto Intercom button for the voice terminal to which you want
to assign the list.
Green light on =
the list is assigned to the voice terminal
Green light off = the list is not assigned to the voice terminal
Touch Administer.
The console beeps twice.
Continue to administer the system, or leave administration mode.
If your system does not have the Call Report option, go on now to
"Administer the System Speed Dial Option." If you do have the Call Report
option, find out how to make it work the way you want in "Administer the
Call Report Option."
ADMINISTER THE CALL
REPORT OPTION
You must have a MERLIN Plus System Data Collector and a printer (AT&T
475 or equivalent) to print out call reports. With the Call Report option,
your system prints out a report on every call that meets the criteria you set
during this phase of system administration. Figure 2-3 in Section 2, "Planning
the System," shows some typical call reports.
For the Call Report option to operate correctly, you have to set the following:
●
●
●
●
Current date and time
Control unit jack for the printer
Minimum length of reported calls
Type of calls reported
Date and Time
Set the current date and time as follows:
1
2
3
4
5
6
Enter administration mode.
The red lights go on next to Administer and Restrict.
Dial *80.
Dial two digits for the month (01 through 12).
Dial two digits for the day (01 through 31).
Dial two digits for the year (00 through 99).
Touch Administer.
The console beeps twice.
Systemwide Options
3-19