Filter
Top Products
ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
Before you administer allowed lists for your system, refer to the Allowed List
Directory that you have filled out.
To set up an allowed list:
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list.
For example, to add an entry to List 5, dail *05.
Dial the 2-digit number of the item in the allowed list (between 01
and 10).
For example, to add an entry to List 3 as the first item on the list, dial
*03 01.
Dial the number, area code, or exchange to be added to the list (maximum
six digits).
For example, to add the 201 area code and 834 exchange to List 2 as the
seventh item on the list, dial *02 07 201 834.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
To delete an entry from an allowed list:
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial a * and a 2-digit code (01 through 08) that corresponds to the number
of the list.
Dial the 2-digit item number (01 through 10) of the entry you want to
delete.
For example, to delete the eighth entry of List 1, dial *01 08.
Touch Drop.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
position.
5-6
Section 5: Reference