Filter
Top Products
Originating a Call
Using an Automatic
Answering Device
●
Use the Basic Operation switch position if you only originate calls with
your telephone or data device. You may also answer incoming calls
using your telephone or data device. However, incoming calls ring
only at your voice terminal, not at the telephone or data device.
●
Use the Automatic Operation switch position for using automatic
answering devices. Before operating thses devices, progrtam an Auto
Answer-All feature button so you can set the devices to go on
automatically when you receive ringing calls.
Headset and Headset Adapter
DESCRIPTION
A Headset connected to your voice terminal by way of the Headset Adapter
allows you to handle calls more easily.
FIGURE 5-7 A headset connected to the headset adapter with an enlargement of
the headset adapter
CONSIDERATIONS
A headset cannot be used with a 5-button voice terminal.
The cord on the headset is plugged into the headset adapter, and the voice
terminal and the adapter are connected by way of a modular cord which
comes with the adapter. The headset adapter plugs into the jack labeled
"Other." Since the 10-button HFAI voice terminal does not have an
"Other" jack, you cannot use a headset with this type of voice terminal.
Accessory Equipment 5-93