Filter
Top Products
Administration Procedure
Do This
Set the background music volume.
1
Enter administration mode.
2 Dial the code for the volume you want:
*16 to turn off the background music.
*17 to set the volume to low.
*18 to set the volume to medium.
*19 to set the volume to high.
Or use the music source volume control instead.
3 Touch Administer.
The console beeps twice.
4
Leave administration mode.
Set the date for call reports.
1
Enter administration mode.
2
Dial *80.
3 Dial two digits for the month (01 through 12), two for the day (01 through
31), and two for the year (00 through 99).
4
Touch Administer.
The console beeps twice.
5 Leave administration mode.
Set the time for call reports.
1 Enter administration mode.
2
Dial *81.
3
Dial two digits for the hour (00 through 23) and two for the minute (00
through 59).
4
Touch Administer.
The console beeps twice.
5 Leave administration mode.
Designate a telephone jack on the control unit
1 Enter administration mode.
For call reports.
2
Dial *82.
The green light goes on next to the Auto Intercom button for the jack to which
the data collector and printer are currently assigned.
3
Touch the Auto Intercom button for the new telephone jack to which you
are assigning the data collector and printer.
The green light goes off next to the Auto Intercom button for the old jack, and
the green light next to the Auto Intercom button for the new jack goes on.
4
Leave administration mode.
Set the calls reported option for call reports.
1 Enter administration mode.
2 Dial *84.
3 Dial the code for the calls reported option you want:
0 means no calls reported
1 means outgoing calls only
2 means outgoing and incoming calls
4
Touch Administer.
The console beeps twice.
5
Leave administration mode.
Quick Reference Guide to System Administration 6-5