Filter
Top Products
CONSIDERATIONS
When the administrator resets the system, all programming done for any voice
terminal in the MERLIN Plus system is erased. If the administrator has
administered customized line assignments for any voice terminal, these are
erased also, and the line configuration is returned to square operation.
ADMINISTRATION
PROGRAMMING
HOW TO USE
System Reset requires readministering your system and reprogramming all
voice terminals.
2
3
4
To reset your system to the initial feature assignments:
1
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *99198.
The console beeps twice.
NOTE:
If the console beeps only once or not at all, the reset didn't work,
probably because someone was using the system when you dialed the
System Reset code. Wait until no one is using the system, and try the
reset again.
Go to the control unit and turn the power off and then on again.
The red lights go on, and the green lights flash.
The console rings every five seconds.
Leave administration mode by sliding the T/P switch to the center
position.
None
This feature is recommended for service personnel only.
System Speed Dial
DESCRIPTION
The administrator can store System Speed Dial codes for telephone numbers,
such as a warehouse number or a branch office number, and account numbers
that people in the office frequently use. People can then dial the number
simply by dialing the proper 3-character code (from #60 through #99). System
Speed Dial is particularly useful when the administrator wants to give users
access to a specific number, for instance, an authorization code for an
alternate long-distance service, but does not want to divulge the number.
For more information about assigning a System Speed Dial codes to account
numbers that the administrator wants to appear on call reports, see "Accout
Number Entry."
5-72
Section 5: Reference