Filter
Top Products
PROGRAMMING
HOW TO USE
4
5
NOTE:
If another voice terminal in your system has that line, you must
remove it from that voice terminal by dialing the intercom number for that
voice terminal and touching the line button that corresponds with that
line so the green light next to it goes off.
Touch Administer.
The console beeps twice
Leave administration mode by sliding the T/P switch to the center
position.
None
When a call comes in on your personal line:
1
Lift your handset.
If you want your personal line to be the first line in your Automatic Line
Selection sequence, tell your system administrator when he or she programs
that feature for your voice terminal. (See "Automatic Line selection.")
Personal Speed Dial
DESCRIPTION
If you don't have many available buttons on which to program Outside Auto
Dial, you can use the programming instructions below to assign a 3-character
Personal Speed Dial code (from #01 through #22) to telephone numbers, PBX,
Centrex, or Custom Calling feature codes you frequently dial.
You can assign a Personal Speed Dial code to a sequence containing up to 16
numbers and special characters.
5-52
Section 5: Reference