Filter
Top Products
ADMINISTRATION
PROGRAMMING
HOW TO USE
If the administrator decides to store a System Speed Dial code with Restriction
Override, all voice terminals in the system can use the code as a type of
password that allows the person to access the outside number, regardless of toll
or outward call restrictions previously placed on the voice terminal. (See
"System Speed Dial.")
If there are two or more voice terminals in the system that will have the same
restrictions, the administrator can use the Copy feature to copy these
restrictions from one voice terminal to another. (See "Copy.")
If your responsibilities do not include system administration, skip this
information.
Before you begin to administer call restrictions for voice terminals in your
system, refer to the Voice Terminal Configuration Forms that you have filled
out.
To administer call restrictions to a voice terminal:
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial the intercom number or touch the Auto Intercom button of the voice
terminal you want to restrict.
Touch Restrict until the green light beside it shows the kind of call
restriction you want the voice terminal to have.
Steady green light on =
Unrestricted (All calls permitted)
Flashing green light =
Toll restricted (local and intercom calls only)
Green light off =
Outward restricted (intercom calls only)
Touch Administer.
The console beeps twice.
Repeat steps 2 through 4 for each voice terminal you want to restrict.
Leave administration mode by sliding the T/P switch to the center
position.
None
Ask your system administrator what call restrictions, if any, he, or she has
assigned to your voice terminal.
MERLIN Plus System Features 5-25