Filter
Top Products
PROGRAMMING
HOW TO USE
Tones
DESCRIPTION
None
Ask your administrator whether you need to dial a toll prefix ( a 1 or a 0)
before you dial an area code and a telephone number.
Your MERLIN Plus system or your voice terminal provides the following tones
to inform you of the progress of a call you are placing or are about to place.
There are also tones that let you know you are in administration or
programming mode and a tone to tell you that your voice terminal is working
satisfactorily.
Meaning of the
Feedback
Sound
Feedback
Dial tone
Steady tone
You can begin dialing when
you are ready.
Busy tone A slow pulsed tone
The line is busy.
Voice signal A beep
You can announce the call
tone
through the other person's
voice terminal speaker.
Dialing
For Touch-Tone lines a
You have dialed another
feedback series of tones digit of the telephone
For rotary lines a series of
number.
rotary pulses
Ringing tone
A ringing sound
The call is ringing at the
other person's phone.
Testing A steady ringing sound
Your MERLIN Plus system
feedback has been installed correctly.
Programming
Your voice terminal rings You are in programming
reminder
every 5 seconds to remind
mode and cannot place or
you that you can't place or
receive calls.
receive calls.
Error/Deny One beep
You have made an error in
tone
administration and should
try the step again.
Confirmation
Two beeps
The administration feature
tone
has been entered into the
system.
MERLIN Plus System Features
5-77