Filter
Top Products
CONSIDERATIONS
ADMINISTRATION
HOW TO USE
FlGURE 5-10 The Off-Premises Telephone Interface
For more information about basic telephones, see "Basic Telephones."
If your responsibilities do not include system administration, skip this
information.
If you do not want the off-premises telephone to ring on every line, you can
specify which lines ring when a call comes in using the Ringing Options
feature and programming the lines for immediate or no ring.
You can also specific the order of lines for the phone by programming an
Automatic Line Selection sequence. Be sure to program Automatic Line
Selection only for those lines to be used by the off-premises telephone.
Basic telephones are able to receive ringing intercom calls, but not intercom
calls with voice announcement. Therefore, you must program the Voice
Announcement Disable feature for the telephone.
In order to program Voice Announcement Disable, Ringing Options, or an
Automatic Line Selection sequence for the basic telephone, you can use either
the Centralized Programming feature on the administrator/attendant console or
program a substitute MERLIN Plus voice terminal plugged into the voice
terminal jack designated for the OPTI.
For more information on assigning lines and features for a basic telephone, see
"Basic Telephones."
See the "User's Guide for Off-Premises and Basic Telephone," included with
the OPTI, for instructions on how to operate a telephone connected to an
OPTI.
Accessory Equipment 5-99